The Greenworks 2700 PSI electric pressure washer is made for homeowners who want more cleaning force than a small electric unit but do not want the fuel, noise or engine care of a gas model. The GPW2702A combines a brushless motor, five quick-connect nozzles, a one-gallon detergent tank, a 25-foot pressure hose and a 35-foot GFCI power cord.
Its headline numbers need a little explanation. The machine provides 2,700 PSI at a rated flow of 1.2 GPM. It can reach 2.3 GPM only in its low-pressure, 100 PSI mode. Those are two different operating points, so buyers should not assume it produces 2,700 PSI and 2.3 GPM at the same time.
This research-based review covers the GPW2702A, SKU 5128402. It explains the published specifications, likely performance, useful features, limitations and buying considerations. It is based on the current Greenworks product page, the official operator manual and manufacturer warranty information. We have not claimed hands-on testing or created an unsupported performance score.
Quick Verdict
The Greenworks GPW2702A is a capable medium-duty residential pressure washer. It should work well for routine cleaning of small and medium driveways, patios, walkways, fences, siding, vehicles and outdoor equipment. Its wide nozzle selection and low-pressure high-flow mode make it more flexible than many entry-level electric models.
The main limitation is water flow. At full pressure, 1.2 GPM is enough for home cleaning but may rinse large concrete areas more slowly than a higher-flow gas machine. The open frame is also larger to store than a compact upright washer, and its continuous-run motor should be switched off during long pauses.
Best for: Homeowners who want strong electric cleaning for several outdoor jobs near a suitable outlet.
Skip it if: You need a machine for daily paid work, very large properties, remote areas without electricity or frequent heavy stain removal.
Greenworks GPW2702A Specifications

Confirm the model number before buying because Greenworks has sold more than one 2,700 PSI pressure washer. This review covers GPW2702A, SKU 5128402, not the older GWP2700 or a retailer-specific package.
| Specification | GPW2702A Published Information |
| Maximum pressure | 2,700 PSI |
| Rated flow at maximum pressure | 1.2 GPM at 2,700 PSI |
| Maximum low-pressure flow | 2.3 GPM at 100 PSI |
| Motor | Smart-sensing brushless motor with JETTFlow technology |
| Power source | 120-volt corded electric |
| Power cord | 35 feet with inline GFCI |
| High-pressure hose | 25 feet, kink-resistant |
| Spray nozzles | 15°, 25°, 40°, soap and turbo |
| Detergent tank | One gallon, onboard |
| Wheels | 10-inch never-flat wheels |
| Nozzle connection | 1/4-inch quick connect |
| Certification | PWMA certified |
| Published warranty | Three years for the tool and ten years for the motor, subject to current terms |
There is one specification conflict worth noting. The current Greenworks page describes the motor as 14 amps in one section and 15 amps in another. Check the rating label on the machine and the manual supplied with your exact unit before choosing a circuit or extension cord.
How Powerful Is This 2700 PSI Electric Pressure Washer?

Pressure and water flow perform different jobs. PSI helps loosen bonded dirt, while GPM carries the loosened material away. The GPW2702A delivers its highest pressure with 1.2 GPM and its highest flow with only 100 PSI.
That split rating is not automatically a weakness. High pressure helps with marks on durable surfaces, while the higher-flow low-pressure mode is useful for rinsing and detergent work. However, it is misleading to multiply 2,700 PSI by 2.3 GPM because the machine does not reach both figures together. When comparing high-pressure performance, use the rated 2,700 PSI at 1.2 GPM.
The pressure is strong for a corded residential unit, but cleaning speed depends on more than the largest PSI number. Surface condition, nozzle choice, detergent, water supply and technique all affect the result. Old oil, paint, rust and stains absorbed deep into concrete may still need special treatment.
Performance by Cleaning Job
Driveways, Patios and Walkways
The machine has enough rated pressure for routine residential concrete cleaning. The 25° nozzle is the safest general starting point. The 15° or turbo nozzle can help on stubborn areas, but both should be tested first and kept moving to avoid visible lines or surface damage.
A compatible 15-inch surface cleaner may produce a more even finish and reduce splash. Still, the 1.2 GPM high-pressure flow means a long driveway will take more time than it would with a higher-flow gas washer.
Decks, Fences and House Siding
Begin with the 40° nozzle from a generous distance. Too much pressure can raise wood grain, remove stain, mark soft material or push water behind siding. Test a hidden area before cleaning the full surface.
Do not use a pressure-washer gun while standing on a ladder. A jet can create sudden kickback. Use approved ground-level extensions for high work and follow the surface manufacturer’s cleaning instructions.
Cars, Boats and Outdoor Furniture
The 40° nozzle or low-pressure rinse mode is the sensible choice for vehicle washing. Keep a safe distance and avoid direct close spray on damaged paint, seals, tires, cameras, electrical connectors, bearings and decals.
Apply only detergent approved for pressure washers. Test painted or delicate furniture underneath before washing the visible area. Soft brushes and a garden hose may be safer for fragile materials.
Lawn and Outdoor Equipment
The washer can remove mud from mowers, carts and garden tools. Allow hot engines to cool first, and avoid air intakes, bearings, electrical parts, seals and warning labels. More pressure is not always better around moving components.
Key Greenworks GPW2702A Features
Brushless Motor and JETTFlow Technology
Greenworks says its smart-sensing motor recognizes the selected nozzle and adjusts water flow for the task. A brushless design removes motor-brush wear and can support efficient operation. It does not make the whole machine maintenance-free; hoses, filters, nozzles, seals and the pump still need inspection and proper storage.
Continuous-Run Motor
Unlike some compact electric washers that stop the motor when the trigger is released, the GPW2702A uses a continuous-run design. This provides immediate pressure when you pull the trigger. During a long break, turn off the washer instead of leaving water circulating inside the pump, where heat can build.
Five Quick-Connect Nozzles

The included nozzle set covers most home cleaning jobs:
| Nozzle | Suitable Starting Use |
| 15° yellow | Stubborn dirt on tested concrete or masonry |
| 25° green | General cleaning of durable outdoor surfaces |
| 40° white | Vehicles, siding, wood and furniture after testing |
| Soap black | Low-pressure detergent application |
| Turbo | Difficult dirt on durable concrete or masonry |
The package does not include a separate fixed 0° nozzle. That is helpful for beginners because a narrow pencil jet can easily damage surfaces.
Hose, Cord and Open Frame
The 25-foot hose and 35-foot power cord provide useful reach around a vehicle or normal home work area. The inline GFCI adds important electrical protection, while the 10-inch wheels help move the open-frame unit over uneven ground.
The trade-off is storage. This machine takes more floor space than a slim upright washer. Measure your garage or shed before ordering, especially if you plan to keep a surface cleaner with it.
One-Gallon Detergent Tank
The large onboard tank reduces the need for frequent refilling. Soap is applied through the black low-pressure nozzle. Use a pressure-washer detergent that does not contain bleach, ammonia, harsh alkalis, solvents or flammable ingredients unless the manual and product label specifically allow it. Rinse the detergent system after use.
Setup and Ease of Use
Assembly includes fitting the handle, wheels and storage parts, then connecting the gun, wand and pressure hose. Before every start, inspect the power cord, plug, GFCI, hose, inlet screen and trigger lock.
Connect a clean cold-water supply, open the tap and purge air with the motor switched off until water flows steadily from the gun. Then install the widest suitable nozzle and test the surface from a safe distance. Greenworks states that inlet water should not exceed 104°F (40°C).
Use a suitable grounded 120-volt outdoor outlet and keep all electrical connections dry and raised away from runoff. Direct connection is preferable. If an extension cord is necessary, follow the exact gauge, length and outdoor-rating requirements in the operator manual.
Pros and Cons

Pros
Strong rated pressure for a residential electric washer
No gasoline, engine oil, exhaust fumes or pull starting
Brushless motor with nozzle-based flow adjustment
Five useful nozzles included
2.3 GPM low-pressure mode for soap and rinsing
25-foot kink-resistant hose and 35-foot GFCI cord
Large one-gallon detergent tank
10-inch wheels for easier movement
PWMA-certified pressure and flow claims
Long published motor warranty, subject to current terms
Cons
Only 1.2 GPM at the full 2,700 PSI rating
Slower on large concrete areas than higher-flow gas machines
Continuous-run motor must be switched off during long pauses
Open frame needs more storage space than a compact washer
Requires access to a suitable outlet and reliable water supply
A weak shared circuit or poor extension cord may cause problems
15° and turbo nozzles can damage delicate surfaces
Intended for residential use rather than daily professional work
Manufacturer information currently conflicts on the amp rating
Who Should Buy the Greenworks GPW2702A?

Buy it if you clean several types of outdoor surfaces during the year and want stronger electric performance without gas-engine care. It is a good match for a homeowner with a small or medium driveway, patio, fencing, siding and one or two vehicles.
Choose a smaller 2000 PSI electric washer if car washing, furniture and light rinsing are your only jobs.
Choose a smaller electric washer if car washing, furniture and light rinsing are your only jobs. Consider a higher-flow gas or professional machine if you clean large concrete areas often, work far from an outlet or plan to use the washer for paid jobs.
Before buying, confirm the exact model, SKU and bundle contents. Retail packages may include a surface cleaner or different accessories. Also check the current price, warranty terms and availability of compatible hoses, guns, fittings and service in your area.
Troubleshooting
Keep troubleshooting brief on this review page so it does not compete with a separate repair guide.
Motor will not start: Check the switch, outlet, plug and GFCI. Remove other high-load appliances from the circuit. Stop if the cord, plug or outlet becomes hot.
Motor buzzes: Unplug the unit, release pressure and connect it directly to a suitable outlet. Low voltage or an unsuitable extension cord can cause trouble.
Low or pulsing pressure: Open the tap fully, straighten the garden hose, check for leaks, clean the inlet screen, purge trapped air and inspect the nozzle.
No detergent: Install the black soap nozzle, check detergent dilution and clear the soap path. High-pressure tips do not draw soap.
No water at the gun: Turn off and unplug the washer, then check the tap, inlet hose, filter and connections. Never run the pump dry.
Note: Internal motor, pump, switch and wiring repairs should be handled by qualified service staff.
Safety, Maintenance and Winter Storage

Wear eye protection and closed, slip-resistant shoes. Hold the gun securely, keep people and pets away, and never point the jet at skin. High-pressure water can cause serious injury and can force dirt deep into a wound.
Keep the machine, plug, GFCI and cord connections dry. The U.S. Consumer Product Safety Commission maintains pressure-washer recall and safety information, which is worth checking for any model you own.
After cleaning, flush detergent, turn off and unplug the machine, close the water supply and release stored pressure. Drain the hoses, inspect connections, clean the inlet screen and store all parts in a dry place. Before freezing weather or long storage, follow the operator manual and use compatible pump protector as directed.
Frequently Asked Questions
Is the Greenworks 2700 PSI electric pressure washer good for driveways?
Yes, it should suit small and medium residential driveways. Use the 25° nozzle for normal cleaning and test the 15° or turbo nozzle only on stubborn areas. Its 1.2 GPM rated high-pressure flow means large driveways may take longer.
Does the GPW2702A produce 2.3 GPM at 2,700 PSI?
No. Greenworks publishes 1.2 GPM at 2,700 PSI and 2.3 GPM at 100 PSI. Do not combine the two maximum figures when comparing cleaning output.
Can it wash a car safely?
Yes, when used carefully. Start with the 40° nozzle from a safe distance and avoid close spray on paint damage, seals, tires, cameras and electrical connections.
Is the Greenworks GPW2702A suitable for professional work?
It is designed as a residential pressure washer. It may handle demanding home jobs, but daily commercial use calls for equipment with a professional duty cycle, higher flow and serviceable components.
Can I use a 15-inch surface cleaner?
Greenworks sells the washer in a package with a 15-inch surface cleaner. For any separate accessory, confirm its PSI, GPM, nozzle size, fitting and warranty compatibility before use.
What warranty does Greenworks provide?
Greenworks currently publishes a three-year limited tool warranty and a ten-year motor warranty for this model. Coverage depends on eligibility, proof of purchase, use and current terms, so read the official Greenworks warranty before buying.Final Verdict: Is the Greenworks 2700 PSI Worth It?
The Greenworks 2700 PSI electric pressure washer is worth considering for homeowners who need more cleaning force than a basic electric unit but want to avoid gas-engine upkeep. The brushless motor, five nozzles, long hose and cord, large detergent tank and wheeled frame make the GPW2702A useful for varied home cleaning.
Its 1.2 GPM flow at full pressure is the main limit. It can remove dirt from concrete, wood, siding and vehicles when the correct nozzle and distance are used, but it will not match the speed or duty cycle of a high-flow professional machine.
The best reason to buy it is balanced residential flexibility: stronger electric pressure, useful low-pressure flow and no fuel storage. Confirm GPW2702A on the label, check the electrical rating on your exact unit and compare the current price with other certified models before deciding.



